Stainless steel cylinder double acting magnetic cushioned, ISO 15552
All variants
On request, these cylinders can be realized with the following options :
(1) Seals: high temperature rod seal (VR); all seals for high temperature (VA); standard seals (GS).
(2)Option: special thread (without rod nut) .
(3)Option: special strokes.
(4)Option: extended rod (WH).
(5)Option: female or male rod.
(6)Option: AISI 316 SS rod and AISI 304 SS rod nut. (X6)
(7)Option: AISI 316 SS all cylinder and AISI 304 SS rod nut. (XA)
(8)Option: without cushioning (W).
(9)Option: without rear cushioning (WR).
(10)Option: without front cushioning (WF).
+ = add stroke lenght (mm)
(11)Option: CICT X mounted (C1).
Rod nut included in the supply.
FOR MORE DETAILS ABOUT THIS RANGE OF CYLINDERS AND THE WAY TO CREATE THE CODE, IN CASE YOU NEED THE CYLINDERS WITH OTHER OPTIONS, PLEASE ACCESS THE DOCUMENTATION.
| Working pressure [bar] | 1 ÷ 10 |
| Temperatura de lucru [°C] | 0 ÷ + 80°C (-20°C ÷ +80°C with dry air) 0 ÷ + 150°C (with high temperature seals) |
| Fluid | Compressed filtered, non lubricated air |
| Rod material | Stainless steel AISI 304 / 316 |
| Seals material | Polyurethane |
| Tube material(body) | Stainless steel AISI 304 / 316 |
| Piston material | Die cast aluminium |
| Ø Bore [mm] | 40 |
| Stroke [mm] | 250 |
| Air connection (EE) | G1/4 |
| Rod thread (KK) | M 12x1,25 |
| A [mm] | 24 |
| AF [mm] | 12 |
| Ø B [mm] | 35 |
| Ø BA [mm] | 35 |
| BG [mm] | 16 |
| Ø D2 | 6 |
| E [mm] | 52 |
| J2 [mm] | 8,5 |
| J3 [mm] | 5 |
| KF [mm] | M8 |
| L2 [mm] | 22 |
| L7 [mm] | 9,2 |
| L8+ [mm] | 105 |
| ØMM | 16 |
| PL [mm] | 14 |
| RT [mm] | M6 |
| SW1 [mm] | 13 |
| SW2 [mm] | 19 |
| TG [mm] | 38 |
| VA [mm] | 4 |
| VD [mm] | 5 |
| WH [mm] | 30 |
| * [mm] | 22 |
